Tabuleiro | Trash Fire 2016 BRRip XviD AC3-EVO | DigitalPlayground Secret Desires XXX 720p MP4-KTR[N1C]
Author: huayting on 7-03-2017, 06:35
MultiBoot 2k10 7.5 Unofficial
MultiBoot 2k10 7.5 Unofficial | 4.61 GB

The multiboot disk of the system administrator is based on BOOTMGR loaders (Windows 8.1.1), Isolinux / Syslinux v.4.06 and Grub4Dos v.0.4.5c. The disk consists of a large number of products, wrapped in a shell, with the ability to boot from CD / DVD, USB Flash Drive, USB-HDD and regular HDD. The main purpose is to prepare the HDD, install the OS (with Win 2000 / XP / 2003 / Vista / 7 installed - WinNTSetup utilities, installation packages are not included in the assembly!), Create / deploy system images, restore / copy data, reanimate the operating system and Boot recovery, cleaning OS from virus / trojan and blocker / pornobanner, testing of the main components of PC and much more.
There is support for a network with the ability to access the Internet and support multimedia. There is the possibility of using most of the programs from the assembly as "portable" (they are not fully portable, they are just self-extracting into a TEMP-catalog with auto-registration) and a convenient way to connect the software assembly package for use in a regular OS or other PE assemblies.
How to create a bootable DVD disc or USB-Flash / USB-HDD


1. For CD / DVD:
You will need a program to record images - for example, Nero Burning ROM. Start the program, Recorder -> Record image, specify the file with the image, make sure that "Finalize disc" and "Disc-At-Once (DAO)" recording method are checked. A disc with other recording settings will not be loaded! For Nero, it is also recommended to "Allow the generation of short Lead-Out" (File -> Options -> Expert properties), this allows to reduce the recording time, speed up the recognition time of the compact and slightly increase the "capacity" of the blank. The recording speed is the minimum within reasonable limits. I recommend 8-16x for CDs or 4x for DVD. The principle is this: we write more slowly -> faster (more reliable) we read.
You can also use other programs that allow you to record images (for example, UltraISO, Alcohol 120, ...).
2. Installing the assembly on the USB flash drive:
Pic

Attention!!! Many utilities (for example, standard windows format) do not fully format the USB flash drive, they look at what's on it, and do not touch sites that seem correct to them. Therefore it is advisable to first clean the flash drive, for example with RMPrepUSB, HDD Low Level Format Tool or run a test to write any of the FlashNull, Check Flash, HD Tune Pro, Flash Memory Toolkit Pro, it's guaranteed to kill the markup and make the format program do everything from scratch . After cleaning, you must "flip" the USB flash drive, and after formatting, check it with CheckDisk (2k10 \ Programs-2k10 \ HDD-Utilites \). If any errors are found, repeat the cleaning of the flash drive and formatting. If you use formatting with BootICE -> Parts Manage -> ReFormat USB disk, then this is an extra operation. BootICE automatically does the cleaning when formatting.
2.1 Flash drive must be preformatted (Warning: All data on the flash drive will be destroyed). This is necessary in order for the flash drive to be perceived by Bios as a USB-HDD, from which it is possible to load the operating system. If the flash drive / screw has already been used as a boot drive, you can skip this item. The flash drive is recommended to be formatted under FAT32 (it works longer and more stable in this file system), but, if necessary, you can use NTFS (faster "kills" the flash drive, requires "safe extraction", but it supports files larger than 4GB). The best way to do this is using RMPrepUSB (there is an assembly in the path 2k10 \ Programs-2k10 \ Flash-Utilites \ RMPrepUSB or from the P2Start.exe menu "Programs 2k10 \ USB-Flash Utilities"). This utility creates the closest to the screw geometry on the USB flash drive. If you mark Boot as HDD (C: 2PTNS), the flash drive will create two partitions (the second minimum size, for maximum imitation of the screw). But I do not recommend using this option, such a flash drive will "hang" household appliances (TVs with a flash player, players, etc.). It is enough to do, as in the figure.

Alternative methods for formatting the flash drive (instead of 2.1)
2.1.1 Format the USB flash drive using the HP USB Disk Storage Format Tool (available in the assembly under 2k10 \ Programs-2k10 \ Flash-Utilites \ HPUSBFW \ or in the menu, in the USB-Flash utilities section), you can use fast formatting. On some PCs may not work (on the USB flash drive is incorrectly connected to the bootloader). If it works, you can use it for both FAT32 and NTFS.
2.1.2 Format the USB flash drive with BootICE (2k10 \ Programs-2k10 \ Flash-Utilites \ BootICE \) ... It is recommended to format it like this: BootICE (select flash drive) -> Parts Manage -> ReFormat USB disk -> USB-HDD mode ( Single Partition) - Align to sectors: 2048 -> Next -> FAT32 (NTFS) -> OK. Too does not work always, at me - the loader of a subkey


Issue Year: 2017
Software version: 7.5 Unofficial
Developer: conty9 / Viktor Kisel
Language: English + Russian
Tabletka: Cured
System requirements:

Computer with 128Mb RAM and above, CD / DVD drive or USB interface.




Dear visitor, you are browsing our website as Guest.
We strongly recommend you to register and login to view hidden contents.

Information
Would you like to leave your comment? Please Login to your account to leave comments. Don't have an account? You can create a free account now.
MEMBER PANEL

Register | Forgot Password
OUR NETWORK
ONLINE SUPPORT
ADVERTISING
Link 1
Designed by kingofculture.com
Go Daddy Web Hosting! A completely unique experience - only  $1.99 / mo from Go Daddy! - 468x60